Features: Brand name: Eachine Item name: E10C Mini RC Quadcopter with camera Frequency: 2.4G Channel: 4CH Gyro: 6 axis Material: ABS Quadcopter Size: 60 x 60 x 28mm Quadcopter Weight: 15g Package Size: 12.3 x 7.5 x 8.5CM Color: silver-gray Blade size: 30mm Flight time: 5 – 6 minutes Flight distance: about 20M Charging time: About 35 minutes Battery for quadcopter: 3.7V 150mah (included) Battery for transmitter: 2 x AA battery (not included) Camera: 2MP 720P Certificate: EN71,EN62115,ROSH,HR4040,ASTM,RTTE,CE. 4 channel mini quadcopter 6-axis flight keep watch over system with adjustable gyro sensitivity With 2.0MP camera can Video/Photograph Up / down / left / right / side flight / hover / flip / hand launch / 360°rolling 3 flight speed mode Low voltage alarm Battery protection With LED light for night flight Memory card and card reader not included Notice: The screw on the back for remote controller battery compartment is not included in the package The SD Card is not included in the package Please turn off the quadcopter when charging Commen Problem and The Solution: 1. Quadcopter lost connection to controller: Pull two function lever to bottom left for 3 seconds, then pull two function lever to bottom right for 3 second. Then try to mach code again(Follow Bullet points 4 ); 2. Quadcopter can’t lift up: Check the propeller to make sure it was installed as it should be(diagonal propellers will have to be the same direction ); 3. Motor not spin: Check the motor to see if anything stuck the motor(hair, string, etc)
✈【Super Mini Drone(Only 60x60x28MM)】: The EACHINE E10C drone is compact and the mini RC drone is easy to slip right into your pockets or small commute bags.The small size makes it easy to go back and forth through ting places.This probably the most best choice for the beginner.
✈【Surprisingly Decent Camera Footage for the size】:The super mini-drone equipped with 2.0MP HD Camera can take aerial photos and videos.You’ll be able to enjoy high-quality image or picture.
✈【To Be a Good Professional Aerial Photography Learner】:1.The motors and circuit board will heat up misuse.We suggest users take a 10-minute cooldown break between flights to ensure the parts last as long as conceivable.2.About the USB Charger:it will have to be used undercurrents input 5V.3.Don’t push the throttle up hard directly.Adjust throttle slowly to avoid damage caused by loss of keep watch over.4.Trim your nano drone before first fly(use the fine tune to trim your drone)
✈【Good Choice for The Starter with High and Low speed】:TWO flight modes mean You’ll be able to get it truly zipping around at the highest speed, or keep it at a more manageable slower speed.The Nanometer shell is very rugged.And the Colorful LED marker lights ensure you at all times know which direction the quadcopter is facing.
✈【Customer Service】: Maybe this is your first drone of aerial.So whether you have questions about our features like how to take a photo,take-off,landing, how to set-up TF card or general maintenance and repairs.Feel free to contact us and we are at all times at your side. Our dedicated customer service representatives will solve your flying problem in time.